Simchair MKIV wiki

User Tools

Site Tools

Trace:
simchair4:guide_collective_head_compact

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
simchair4:guide_collective_head_compact [2019/09/15 17:55]
127.0.0.1 external edit 		simchair4:guide_collective_head_compact [2019/10/27 20:58] (current)
hc625ma
Line 4: Line 4:
 ===== Summary ===== ===== Summary =====
  
-This head is perfect for use with motion platforms, as it can be used without counterweight, or even without the pneumatic mod (although I highly recommend the latter!). Also great as a generic gaming device – its shape allows using it as a throttle lever in single-engine airplanes when mounted to the GUNDE chair onto the Malinda mount at 30 degrees. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15628064868833158517964134919653-1024x1024.jpg?400 |}}+This head is perfect for motion platform users, as it can be used without a counterweight, or even without the pneumatic mod (although I do highly recommend the latter!). It also works well, as a generic gaming device – The shape allows using it as a throttle lever on a single-engine airplane when mounted to the GUNDE chair onto the Malinda mount at 30 degrees. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15628064868833158517964134919653-1024x1024.jpg?400 |}}
  
  
 ===== Components ===== ===== Components =====
  
-  * 4 x MTS-123 or MTS-103 switches+  * 4 x MTS-123 or MTS-103 switches (MTS-123, (on) - off (on) momentary ones, are preferred)
   * 2 x PBS-10B2 buttons   * 2 x PBS-10B2 buttons
   * 1 x KY-023 ministick board   * 1 x KY-023 ministick board
Line 15: Line 15:
   * 1 x Arduino Pro Mini   * 1 x Arduino Pro Mini
  
-===== Downloads =====+===== Repository path =====
  
-[[https://github.com/hc625ma/simchair4_models/tree/master/printable%20components/peripherals/helicopter/collective%20lever/b_lever%20bodies/compact%20collective|STL’s / Sources]]+simchair4_models\printable components\peripherals\helicopter\collective lever\c_switch panels\compact integrated head
  
  
 ===== Assembly guide ===== ===== Assembly guide =====
  
-1. Assemble the lever as described in the single collective manual, up to the point of installing part 2 of the throttle frame. Install the compact head instead of it: \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627933669808738192164808220521-1024x1024.jpg?300}}+1. Assemble the lever as described in the [[simchair4:guide_collective_body_single-throttle-for-integrated-heads|single throttle lever for integrated heads assembly manual]]. Install the compact collective head into the lever body. 
 + 
 + {{http://hc625ma.org/wp-content/uploads/2019/07/15627933669808738192164808220521-1024x1024.jpg?300}}
  
 ---- ----
  
-2. Solder an ISP header to the Pro Mini board. Solder I2C cable to the board as usual. Remove LED from pin 13. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627934435157349507168809673598-1024x1024.jpg?300 |}}+2.  
 + 
 +-Solder an ISP header to the Pro Mini board.  
 + 
 +-Solder the I2C cable to the board as usual.  
 + 
 +-Remove LED from pin 13.  
 + 
 +\\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627934435157349507168809673598-1024x1024.jpg?300 |}}
  
 ---- ----
Line 71: Line 81:
 ---- ----
  
-9. Flash the board with its firmware through ISP header.+9. Flash the board with it's firmware, through the ISP header.
  
 Uncomment  Uncomment 
simchair4/guide_collective_head_compact.1568562914.txt.gz · Last modified: 2019/09/15 17:55 by 127.0.0.1

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki