Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
simchair4:guide_collective_head_compact [2019/09/21 21:25] retrogamer |
simchair4:guide_collective_head_compact [2019/10/27 20:58] (current) hc625ma |
===== Summary ===== | ===== Summary ===== |
| |
This head is perfect for use with motion platforms, as it can be used without counterweight, or even without the pneumatic mod (although I highly recommend the latter!). It is also works well, as a generic gaming device – The shape allows using it as a throttle lever in a single-engine airplane, when mounted to the GUNDE chair onto the Malinda mount at 30 degrees. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15628064868833158517964134919653-1024x1024.jpg?400 |}} | This head is perfect for motion platform users, as it can be used without a counterweight, or even without the pneumatic mod (although I do highly recommend the latter!). It also works well, as a generic gaming device – The shape allows using it as a throttle lever on a single-engine airplane when mounted to the GUNDE chair onto the Malinda mount at 30 degrees. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15628064868833158517964134919653-1024x1024.jpg?400 |}} |
| |
| |
===== Components ===== | ===== Components ===== |
| |
* 4 x MTS-123 or MTS-103 switches | * 4 x MTS-123 or MTS-103 switches (MTS-123, (on) - off (on) momentary ones, are preferred) |
* 2 x PBS-10B2 buttons | * 2 x PBS-10B2 buttons |
* 1 x KY-023 ministick board | * 1 x KY-023 ministick board |
* 1 x Arduino Pro Mini | * 1 x Arduino Pro Mini |
| |
===== Downloads ===== | ===== Repository path ===== |
| |
[[https://github.com/hc625ma/simchair4_models/tree/master/printable%20components/peripherals/helicopter/collective%20lever/b_lever%20bodies/compact%20collective|STL’s / Sources]] | simchair4_models\printable components\peripherals\helicopter\collective lever\c_switch panels\compact integrated head |
| |
| |
===== Assembly guide ===== | ===== Assembly guide ===== |
| |
1. Assemble the lever as described in the single collective manual, up to the point of installing part 2 of the throttle frame. Install the compact head instead of it: \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627933669808738192164808220521-1024x1024.jpg?300}} | 1. Assemble the lever as described in the [[simchair4:guide_collective_body_single-throttle-for-integrated-heads|single throttle lever for integrated heads assembly manual]]. Install the compact collective head into the lever body. |
| |
| {{http://hc625ma.org/wp-content/uploads/2019/07/15627933669808738192164808220521-1024x1024.jpg?300}} |
| |
---- | ---- |
| |
2. | 2. |
* Unordered List ItemSolder an ISP header to the Pro Mini board. | |
* Unordered List ItemSolder the I2C cable to the board as usual. | -Solder an ISP header to the Pro Mini board. |
* Unordered List ItemRemove LED from pin 13. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627934435157349507168809673598-1024x1024.jpg?300 |}} | |
| -Solder the I2C cable to the board as usual. |
| |
| -Remove LED from pin 13. |
| |
| \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627934435157349507168809673598-1024x1024.jpg?300 |}} |
| |
---- | ---- |
---- | ---- |
| |
9. Flash the board with its firmware through ISP header. | 9. Flash the board with it's firmware, through the ISP header. |
| |
Uncomment | Uncomment |