User Tools

Site Tools


simchair4:guide_collective_head_compact

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
simchair4:guide_collective_head_compact [2019/09/22 02:43]
hc625ma
simchair4:guide_collective_head_compact [2019/10/27 20:58] (current)
hc625ma
Line 4: Line 4:
 ===== Summary ===== ===== Summary =====
  
-This head is perfect for use with motion platforms, as it can be used without counterweight, or even without the pneumatic mod (although I highly recommend the latter!). It is also works well, as a generic gaming device – The  shape allows using it as a throttle lever in a single-engine airplanewhen mounted to the GUNDE chair onto the Malinda mount at 30 degrees. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15628064868833158517964134919653-1024x1024.jpg?400 |}}+This head is perfect for motion platform users, as it can be used without counterweight, or even without the pneumatic mod (although I do highly recommend the latter!). It also works well, as a generic gaming device – The shape allows using it as a throttle lever on a single-engine airplane when mounted to the GUNDE chair onto the Malinda mount at 30 degrees. \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15628064868833158517964134919653-1024x1024.jpg?400 |}}
  
  
 ===== Components ===== ===== Components =====
  
-  * 4 x MTS-123 or MTS-103 switches+  * 4 x MTS-123 or MTS-103 switches (MTS-123, (on) - off (on) momentary ones, are preferred)
   * 2 x PBS-10B2 buttons   * 2 x PBS-10B2 buttons
   * 1 x KY-023 ministick board   * 1 x KY-023 ministick board
Line 22: Line 22:
 ===== Assembly guide ===== ===== Assembly guide =====
  
-1. Assemble the lever as described in the single collective manual, up to the point of installing part 2 of the throttle frame. Install the compact head instead of it: \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15627933669808738192164808220521-1024x1024.jpg?300}}+1. Assemble the lever as described in the [[simchair4:guide_collective_body_single-throttle-for-integrated-heads|single throttle lever for integrated heads assembly manual]]. Install the compact collective head into the lever body. 
 + 
 + {{http://hc625ma.org/wp-content/uploads/2019/07/15627933669808738192164808220521-1024x1024.jpg?300}}
  
 ---- ----
simchair4/guide_collective_head_compact.1569113017.txt.gz · Last modified: 2019/09/22 02:43 by hc625ma