Simchair MKIV wiki

User Tools

Site Tools

Trace:
simchair4:guide_collective_body_single-throttle-physical-idle-stop-latch

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
simchair4:guide_collective_body_single-throttle-physical-idle-stop-latch [2019/09/21 22:28]
retrogamer 		simchair4:guide_collective_body_single-throttle-physical-idle-stop-latch [2020/08/27 09:07] (current)
hc625ma
Line 10: Line 10:
   * 1 x M3 x 35mm screw and a nut   * 1 x M3 x 35mm screw and a nut
   * 1 x M4x80 bolts   * 1 x M4x80 bolts
 +  * 1 x PBS-16B button
 +  * 1 x 16K1 10KOhm LINEAR rotary potentiometer
  
  
 ==== Repository path ==== ==== Repository path ====
  
-simchair4_models\printable components\peripherals\helicopter\collective lever\b_lever bodies\single throttle +simchair4_models\printable components\peripherals\helicopter\collective lever\b_lever bodies\single throttle collective with throttle latch 
  
 ==== Assembly highlights ==== ==== Assembly highlights ====
  
-Please remember to print the latch pin using 100% infill: As at 40% infill, some users have been reporting issues with these parts breaking.+Please remember to print the latch pin using 100% infill: As at 40% infill, some users have been reporting issues with the part breaking.
  
 ==== Assembly Guide ==== ==== Assembly Guide ====
  
-1. Assemble the collective base MKIV.+1. Assemble the collective base MKIV using a 200mm piece of 10x10mm aluminum piping.
  
 {{http://hc625ma.org/wp-content/uploads/2019/07/IMG_20190705_112425.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/07/IMG_20190705_112425.jpg?300}}
Line 56: Line 58:
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541463688991825727795946775650.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541463688991825727795946775650.jpg?300}}
  
-10. Cut a 105mm lenght of aluminum tubing, and file the ends.+10. Cut a 105mm length of aluminum tubing, and file the ends.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541474507941295113377459275507.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541474507941295113377459275507.jpg?300}}
  
-Insert the tubing piece into the throttle frame p2. Drill it through it's holes, then press-fit the nuts to the sockets of throttle frame p2. Use 2 M3x30mm screws to fix the tubing piece in it.+Insert the tubing piece into the throttle frame p2. Drill it through its holes, then press-fit the nuts to the sockets of throttle frame p2. Use 2 M3x30mm screws to fix the tubing piece in it.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541475768578064373597987404685.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541475768578064373597987404685.jpg?300}}
Line 69: Line 71:
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541483771146966794618278171143.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541483771146966794618278171143.jpg?300}}
  
-12. Fasten the two parts of the throttle frame together using a M4x80mm screw.+12. Fasten the two parts of the throttle frame together using an M4x80mm screw.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541484651862246480655563521228.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541484651862246480655563521228.jpg?300}}
Line 77: Line 79:
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541523346773794427178807155.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541523346773794427178807155.jpg?300}}
  
-14. Disassemble the button, and take out the spring. Put the spring into the throttle latch socket.+14. Disassemble the button, and take out the spring. Insert the spring to the throttle latch socket.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541524871411199565383994500314.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541524871411199565383994500314.jpg?300}}
Line 90: Line 92:
 {{http://hc625ma.org/wp-content/uploads/2019/04/1554152985294619000168038745919.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/1554152985294619000168038745919.jpg?300}}
  
-17. Glue the button top, to the latch. You can choose between a small button, and a scale 206-style one.+17. Glue the button top, to the latch. You can choose between a small button and a scale 206-style one.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541531682956357142226164783346.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541531682956357142226164783346.jpg?300}}
Line 104: Line 106:
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541543801959180984975633657129.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541543801959180984975633657129.jpg?300}}
  
-19. To secure the Ethernet cable in it's place, use some hot glue.+19. To secure the Ethernet cable in its place, use some hot glue.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541547885343836952077109516302.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541547885343836952077109516302.jpg?300}}
  
-20. Put the I2C cable housing onto the lever. Use a M3x35mm screw, and secure it, in it's place.+20. Put the I2C cable housing onto the lever. Use an M3x35mm screw, and secure it, in its place.
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541549179058882835023411925219.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15541549179058882835023411925219.jpg?300}}
Line 119: Line 121:
     I2C HEAD CABLE SCL                   -> PRO MINI PIN A5     I2C HEAD CABLE SCL                   -> PRO MINI PIN A5
     I2C HEAD CABLE SDA                   -> PRO MINI PIN A4     I2C HEAD CABLE SDA                   -> PRO MINI PIN A4
-     
  
-22. Flash the board using: single_collective.ino, and proceed to calibrate the lever. +22. Put the lid onto the housing and secure with 4 M8x70mm screws.
- +
-23. Now it’s a good time to do some cable management: +
- +
-{{http://hc625ma.org/wp-content/uploads/2019/04/15542134414293203651204810329367.jpg?300}} +
- +
-24. Put the lid onto the housing and secure with 4 M8x75mm screws.+
  
 {{http://hc625ma.org/wp-content/uploads/2019/04/15542139378672177653029232012817.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/04/15542139378672177653029232012817.jpg?300}}
  
-25. Make sure all the cables fit snugly inside the enclosure, and nothing touches the magnet: +23. Make sure all the cables fit snugly inside the enclosure, and nothing touches the magnet: 
 Then you can close the hatch. Then you can close the hatch.
  
simchair4/guide_collective_body_single-throttle-physical-idle-stop-latch.1569097688.txt.gz · Last modified: 2019/09/21 22:28 by retrogamer

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki