User Tools

Site Tools


simchair4:guide_simchair3_pedals

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
simchair4:guide_simchair3_pedals [2019/09/19 18:26]
wikifish created
simchair4:guide_simchair3_pedals [2021/03/16 15:26]
hc625ma
Line 1: Line 1:
-====== UH-1 Huey Style Collective Head ======+====== Helicopter pedals ======
  
 ===== Summary ===== ===== Summary =====
Line 6: Line 6:
  
  \\ {{http://hc625ma.org/wp-content/uploads/2018/05/pedals.jpg?300 }}  \\ {{http://hc625ma.org/wp-content/uploads/2018/05/pedals.jpg?300 }}
-{{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181216_024250.jpg}}+{{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181216_024250.jpg?300 }}
 == Special features == == Special features ==
   * pseudo force trim support for both rubber-bands based and spring-loaded versions (different modes)   * pseudo force trim support for both rubber-bands based and spring-loaded versions (different modes)
Line 45: Line 45:
 ---- ----
  
-3. Press fit the 30mm piece into the frame carefully so the marks will match frame sides.  File as needed. Use 120mm tubing piece as detents.+3. Press fit the 300mm piece into the frame carefully so the marks will match frame sides.  File as needed. Use 120mm tubing piece as detents.
 \\ {{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181211_160633.jpg?300 }} \\ {{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181211_160633.jpg?300 }}
 {{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181213_211154-1.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181213_211154-1.jpg?300}}
Line 220: Line 220:
  
 33. The only thing that’s left now is to press-fit the Ethernet socket to the square slot of the electronics housing part, pour some hot glue to fix it there, install the housing part onto the frame and fix with 4 M3x50mm screws. 33. The only thing that’s left now is to press-fit the Ethernet socket to the square slot of the electronics housing part, pour some hot glue to fix it there, install the housing part onto the frame and fix with 4 M3x50mm screws.
-{{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181216_021556.jpg?300}}+\\ {{http://hc625ma.org/wp-content/uploads/2018/12/IMG_20181216_021556.jpg?300}}
  
 You can now pull an ethernet cable through a square cable channel in the frame, connect it to master controller and fly! You can now pull an ethernet cable through a square cable channel in the frame, connect it to master controller and fly!
simchair4/guide_simchair3_pedals.txt · Last modified: 2021/04/28 14:05 by hc625ma