This is a 3D printable set of advanced helicopter (more stuff coming) controls. If you have a printer and love flying in simulators, this is not only an inexpensive way to get yourself a set of hobby-grade controls, but also a great project to educate yourself in electronics and programming! This is also something cool to build with your kids.

Pretty much anything that can use a standard joystick. However, some advanced functions require the game to support more than 32 joystick buttons and more than one joystick. All major sims are supported - DCS, X-Plane11, FSX, Prepar 3D, Flyinside Flight Simulator, etc.

Yes it is! Functionality wise, it may very well be the most advanced controls system around. Every part is designed to last, with repairability in mind, and also with love to our hobby. It feels fantastic in VR and has some modules that are specifically designed to be used while wearing VR glasses. Precision wise, it's really good - featuring serious mechanics with metallic axes featuring 0,2mm clearance between an axis and its bearings!

The software allows for endless expansion of the set, you can connect as many stuff as you like.

There's a YouTube channel, where I post videos whenever something interesting happens. Usually, new hardware reviews - along with its tests in the sim.

Not really. It's pretty much a Lego-like experience, with some soldering and flashing Arduinos involved. During the building process, you will learn a lot of cool new stuff, that will allow you to build your own modules and robotics-related hobby projects in the future! Some stuff is documented poorer than the other, but this wiki is there to fix that issue.

That depends on how long you are willing to wait for your parts. Almost all parts can be sourced worldwide, some harder to find parts can be sourced from the donor shop page. It's affordable, basically a fraction of the price of some of the hobby-grade controls on the market. More expensive than an average entry-level stick or a gamepad though.

Not really! Here you can customize everything, but if you don't feel like doing that, you can avoid the process entirely - just need to uncomment some lines in the configuration tab of the software to enable your chosen hardware.

Well, it's definitely not a weekend project. Depending on your skills, with printing time included, it may take something like a month. Each small part (like e.g. collective base, collective head, or collective lever body), however, is a separate device and is designed to be assembled in a day or two.

Consult with Build order and best practices page.

This is an open-source project, and its materials are available for free. However, I've been able to get it where it is now solely because of donations, orders, and other support from fellow simmers. The amount of time and resources needed to develop new hardware, software, and documentation for it reached the point where I wouldn't have been able to proceed without your help. Thank you for your support!

You can support the project with a donation. It is much appreciated. There will soon be a donor shop page where you can order some harder to find parts in a convenient way.

Thank you!