Differences

This shows you the differences between two versions of the page.

--- simchair4:guide_collective_base [2020/03/19 20:28]
hc625ma
+++ simchair4:guide_collective_base [2021/03/14 22:04] (current)
hc625ma
@@ Line 1: / Line 1: @@
-=======Simchair MKIV collective lever base=======
+=======Simchair MKIV collective lever base classic=======
 {{http://hc625ma.org/wp-content/uploads/2019/07/IMG_20190705_112425.jpg?300 }}
 {{http://hc625ma.org/wp-content/uploads/2019/07/IMG_20190705_112438.jpg?300}}
@@ Line 14: / Line 14: @@
   * 2 x M6x18x8mm hubs
   * 6 x M4x40mm screws
-  * 2 x M4x70mm screws for securing devices that go into the slot on top
+  * 6 x M4x70mm screws (2 of them for securing devices that go into the slot on top)
   * 1 x M3x20mm screw (round head)
   * 1 x M3 nyloc nut
@@ Line 80: / Line 80: @@
 ----
-. Put a reinforced M6 nut onto the bolt
+. Put a reinforced M6 washer onto the bolt
 \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15621642402968440300197695975340.jpg?300}}
 ----
-. Put the axis though the lever connector part
+. Put the axis though the lever connector part (orientation is important!)
 \\ {{http://hc625ma.org/wp-content/uploads/2019/07/15621655001942847367003318010919.jpg?300}}

Simchair MKIV wiki