Differences

This shows you the differences between two versions of the page.

--- simchair4:guide_collective_body_twin-throttle [2019/09/24 23:44]
retrogamer [Assembly highlights]
+++ simchair4:guide_collective_body_twin-throttle [2020/03/20 21:54] (current)
hc625ma
@@ Line 112: / Line 112: @@
 {{http://hc625ma.org/wp-content/uploads/2019/04/15541547885343836952077109516302.jpg?300}}
-. Put the I2C cable housing onto the lever. Use an M3x35mm screw, and secure it, in its place.
+. Put the I2C cable housing onto the lever.
 . Solder the cables to your Arduino Pro Mini board, as follows:
@@ Line 123: / Line 123: @@
     I2C HEAD CABLE SDA                   -> PRO MINI PIN A4
-. Put the lid onto the housing and secure with 4 M8x70mm screws.
+. Put the lid onto the housing, and secure it with 4 M8x70mm screws.
 {{http://hc625ma.org/wp-content/uploads/2019/04/15542139378672177653029232012817.jpg?300}}
-. Make sure all the cables fit snugly inside the enclosure, and nothing touches the magnet:
+. Please check that all of the cables fit snugly inside the enclosure, and nothing touches the magnet.
 Then you can close the hatch.

Simchair MKIV wiki