Simchair MKIV wiki

User Tools

Site Tools

Trace:
simchair4:guide_cyclic_grip-b8

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
simchair4:guide_cyclic_grip-b8 [2019/10/29 21:58]
hc625ma 		simchair4:guide_cyclic_grip-b8 [2021/01/22 20:16] (current)
hc625ma
Line 13: Line 13:
   * 1 x Arduino pro mini board   * 1 x Arduino pro mini board
   * 1 x KY-023 joystick module   * 1 x KY-023 joystick module
-  * 1 x USBtoCOM adapter (e.g., PL2303) or another Arduino to program it 
   * 3 x PBS-11B buttons   * 3 x PBS-11B buttons
   * 1 x PBS-10B-2 button (trigger intercom)   * 1 x PBS-10B-2 button (trigger intercom)
Line 24: Line 23:
   * 1 x m3x40 screw for trigger mounting   * 1 x m3x40 screw for trigger mounting
  
-  * 1 x Simchair MKIII I2C controller (Arduino Leonardo based) (https://www.thingiverse.com/thing:2919692) +  * 1 x Simchair MKIV master controller 
-  * 1 x Simchair MKIII cyclic gimbal V2 (https://www.thingiverse.com/thing:2917209)+  * 1 x Simchair MKIV cyclic base
  
   * Hot glue gun   * Hot glue gun
  
 =====Repository path===== =====Repository path=====
-[[https://github.com/hc625ma/simchair_models/tree/master/Components/Peripherals/B8%20flight%20stick|simchair_models/tree/master/Components/Peripherals/B8 flight stick]]+[[https://github.com/hc625ma/simchair4_models/tree/master/printable%20components/peripherals/helicopter/cyclic%20lever/b_grips/B8%20flight%20stick]]
  
 =====Available mods===== =====Available mods=====
Line 111: Line 110:
   TRIGGER INTERCOM         –> between PIN 6 and GND   TRIGGER INTERCOM         –> between PIN 6 and GND
   TRIGGER PTT (full press) –> between PIN 7 and GND   TRIGGER PTT (full press) –> between PIN 7 and GND
-  A4  (SDA)                -> ethernet cable blue wire +  A4(SDA)                  -> ethernet cable blue wire 
-  A5  (SCL)                -> ethernet cable green-white wire+  A5(SCL)                  -> ethernet cable green-white wire
   VCC                      -> ethernet cable orange-white wire   VCC                      -> ethernet cable orange-white wire
   GND                      -> ethernet cable orange wire   GND                      -> ethernet cable orange wire
Line 121: Line 120:
 {{http://hc625ma.org/wp-content/uploads/2018/05/photo-300x188.gif}} {{http://hc625ma.org/wp-content/uploads/2018/05/photo-300x188.gif}}
  
-After soldering everything, put the Pro mini board into its socket, organize wires, put an M8x75 bolt with a nut into its place, and finally screw the halves together.+After soldering everything, put the Pro Mini board into its socket, organize wires, put an M8x75 bolt with a nut into its place, and finally screw the halves together.
  
simchair4/guide_cyclic_grip-b8.1572382721.txt.gz · Last modified: 2019/10/29 21:58 by hc625ma

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki