Differences

This shows you the differences between two versions of the page.

--- simchair4:guide_cyclic_grip-b8 [2019/10/29 21:59]
hc625ma [Electronics]
+++ simchair4:guide_cyclic_grip-b8 [2021/01/22 20:16] (current)
hc625ma
@@ Line 13: / Line 13: @@
   * 1 x Arduino pro mini board
   * 1 x KY-023 joystick module
-  * 1 x USBtoCOM adapter (e.g., PL2303) or another Arduino to program it
   * 3 x PBS-11B buttons
   * 1 x PBS-10B-2 button (trigger intercom)
@@ Line 24: / Line 23: @@
   * 1 x m3x40 screw for trigger mounting
-  * 1 x Simchair MKIII I2C controller (Arduino Leonardo based) (https://www.thingiverse.com/thing:2919692)
+  * 1 x Simchair MKIV master controller
-  * 1 x Simchair MKIII cyclic gimbal V2 (https://www.thingiverse.com/thing:2917209)
+  * 1 x Simchair MKIV cyclic base
   * Hot glue gun
 =====Repository path=====
-[[https://github.com/hc625ma/simchair_models/tree/master/Components/Peripherals/B8%20flight%20stick|simchair_models/tree/master/Components/Peripherals/B8 flight stick]]
+[[https://github.com/hc625ma/simchair4_models/tree/master/printable%20components/peripherals/helicopter/cyclic%20lever/b_grips/B8%20flight%20stick]]
 =====Available mods=====
@@ Line 121: / Line 120: @@
 {{http://hc625ma.org/wp-content/uploads/2018/05/photo-300x188.gif}}
-After soldering everything, put the Pro mini board into its socket, organize wires, put an M8x75 bolt with a nut into its place, and finally screw the halves together.
+After soldering everything, put the Pro Mini board into its socket, organize wires, put an M8x75 bolt with a nut into its place, and finally screw the halves together.

Simchair MKIV wiki

User Tools

Site Tools

Differences

Page Tools