simchair4:guide_collective_head_b206
This is an old revision of the document!
Table of Contents
Bell 206 scale collective head
Summary
This is a scale Bell 206 collective head! It's made using photos with measurements, so should be really close to the real one. It's quite simple, but really has everything you need to fly helicopters (if used with the lever body with a physical throttle latch).
Components
- 1 x MTS-103 - E1 switch
- 1 x KN3(B) SPDT on-off-on switch (12mm)
- 1 x PBS-10B2 button
- 3 x M3x40mm countersunk screws and nuts
- 1 x Arduino Pro Mini
Repository path
simchair4_models\printable components\peripherals\helicopter\collective lever\c_switch panels\b206 collective head
Assembly guide
simchair4/guide_collective_head_b206.1571083696.txt.gz · Last modified: 2019/10/14 22:08 by hc625ma
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
