Simchair MKIV wiki

User Tools

Site Tools

Trace:
simchair4:guide_collective_pneumatic-mod

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
simchair4:guide_collective_pneumatic-mod [2019/09/24 23:37]
retrogamer 		simchair4:guide_collective_pneumatic-mod [2020/02/21 19:31] (current)
hc625ma
Line 12: Line 12:
 =====You will need:===== =====You will need:=====
  
-1 * MAL16-150 pneumatic actuator +  * 1 * MAL16-100 pneumatic actuator 
-1 * 20×10x1000mm aluminum rectangular pipe +  * 1 * 20×10x1000mm aluminum rectangular pipe 
-4 * M3x50mm screws and nuts +  * 4 * M3x50mm screws and nuts 
-2 * M4x80mm screws +  * 2 * M4x80mm screws 
-4 * M8x75 bolts +  * 4 * M8x55 bolts 
-2 * M8x45 bolts +  * 2 * M8x45 bolts 
-a pack of M8 washers, spring washers, and nuts +  * a pack of M8 washers, spring washers, and nuts 
-4 * M8x100 bolts +  * 4 * M8x100 bolts 
-2* M5*12 screws +  * 2* M5*12 screws 
-1 * M6x30 bolt +  * 1 * M6x30 bolt 
-2* M6 nuts +  * 2* M6 nuts 
-4 x 608 bearings (standard skateboard bearings)+  * 4 x 608 bearings (standard skateboard bearings)
  
 =====Repository path===== =====Repository path=====
Line 203: Line 203:
 {{http://hc625ma.org/wp-content/uploads/2019/01/IMG_20190105_022405.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/01/IMG_20190105_022405.jpg?300}}
  
-16. The last step is to adjust airscrews of the cylinder, screw them in for more resistance, unscrew them a bit for less. You want a silky-smooth movement of the lever. **Screws should not touch the rod! It will damage the cylinder!**+16. The last step is to adjust the airscrews of the cylinder, screw them in, for more resistance, unscrew them a bit for less. You will want a silky-smooth movement of the lever. **Make sure the Screws do not touch the rod! If they do, they will damage the cylinder!**
  
 {{http://hc625ma.org/wp-content/uploads/2019/01/IMG_20190105_022434.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/01/IMG_20190105_022434.jpg?300}}
  
-Congratulations! With this mod, you will get the most out of your collective. Final adjustments can only be made while flying, so spool up your favorite helicopter for a test ride! You want a perfect, silky-smooth operation of the lever, with reliable fixation in all of its travel range. Note that depending on airscrews position you may need to hold the lever for one or two seconds before taking your hand off it.+Congratulations! With this mod, you will get the most out of your collective. Final adjustments can only be made while flying, so take your favorite helicopter for a test ride! You want a perfect, silky-smooth operation of the lever, with reliable fixation in all of it's travel range. Please note, that depending on airscrews position you may need to hold the lever for one or two seconds before taking your hand off.
  
 {{http://hc625ma.org/wp-content/uploads/2019/01/IMG_20190105_033455.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/01/IMG_20190105_033455.jpg?300}}
  
  
simchair4/guide_collective_pneumatic-mod.1569361075.txt.gz · Last modified: 2019/09/24 23:37 by retrogamer

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki