Simchair MKIV wiki

User Tools

Site Tools

Trace: • guide_master_controller
simchair4:guide_master_controller

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
simchair4:guide_master_controller [2019/09/24 23:49]
retrogamer 		simchair4:guide_master_controller [2020/11/27 22:14] (current)
hc625ma
Line 1: Line 1:
 ====== MKIV MASTER CONTROLLER ====== ====== MKIV MASTER CONTROLLER ======
 ===== Summary ===== ===== Summary =====
-The MKIV master controller is designed to be stackable - unlike the MKIII version, we can use any number of them, and assign any device to any controller. Standard helicopter setup fits a single board - even with the VRMaxII pedestal. If you feel that you want faster response from the controls, just add another box and move some of your devices there. Please remember, that for the force trim and sensitivity switch to work, bothe the cyclic and the pedals need to belong to the same master.+The MKIV master controller is designed to be stackable - unlike the MKIII version, we can use any number of them and assign any device to any controller. Standard helicopter setup fits a single board - even with the VRMaxII pedestal. If you feel that you want a faster response from the controls, just add another box and move some of your devices there. Please remember, that for the force trim and sensitivity switch to work, both the cyclic and the pedals need to belong to the same master.
  
 \\ {{http://hc625ma.org/wp-content/uploads/2019/08/15657735590315663353894096154577-1024x1024.jpg?300 }} \\ {{http://hc625ma.org/wp-content/uploads/2019/08/15657735590315663353894096154577-1024x1024.jpg?300 }}
Line 10: Line 10:
   * 1 x FTDI232 USB-UART board   * 1 x FTDI232 USB-UART board
   * 1 x 6x6x5mm tactile button   * 1 x 6x6x5mm tactile button
-  * 4 x TJ8P8C sockets+  * 4 x TJ8P8C Ethernet sockets (12,5x15x17,6mm)
   * 4 x M3x30mm screw   * 4 x M3x30mm screw
   * 2 x M3x40mm screw   * 2 x M3x40mm screw
Line 26: Line 26:
 ---- ----
  
-2. Put the RST button into its socket in the controller box, fix with hot glue.+2. Put the RST button into its socket in the controller box, fix it with hot glue.
 \\ {{http://hc625ma.org/wp-content/uploads/2019/08/15657315899993905907538157673086-1024x1024.jpg?300 }} \\ {{http://hc625ma.org/wp-content/uploads/2019/08/15657315899993905907538157673086-1024x1024.jpg?300 }}
 {{http://hc625ma.org/wp-content/uploads/2019/08/15657317931607389357829137673491-1024x1024.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/08/15657317931607389357829137673491-1024x1024.jpg?300}}
Line 32: Line 32:
 ---- ----
  
-4. Put the Leonardo board into the box, fix with 4x M3x6mm screws.+4. Install the Leonardo board into the box, fix it with 4x M3x6mm screws.
 \\ {{http://hc625ma.org/wp-content/uploads/2019/08/1565732037824443912943185966659-1024x1024.jpg?300}} \\ {{http://hc625ma.org/wp-content/uploads/2019/08/1565732037824443912943185966659-1024x1024.jpg?300}}
  
 ---- ----
  
-5. Solder 4 4-wire cables to Ethernet sockets, add 5th 4 wire cable and make a cable tie (tie wires of the same color together and solder them). Cover ties with thermal shrink tube. Pin 1 is where the white-orange wire of an Ethernet cable will go.+5.  
 +  * Solder 4 4-wire cables to Ethernet sockets 
 +  * Add 5th 4 wire cable and make a cable tie (tie wires of the same color together and solder them).  
 +  * Cover ties with thermal shrink tube. Pin 1 is where the white-orange wire of an Ethernet cable will go.
 \\ {{http://hc625ma.org/wp-content/uploads/2019/08/ethcable568b.gif?300 }} \\ {{http://hc625ma.org/wp-content/uploads/2019/08/ethcable568b.gif?300 }}
 +{{:simchair4:rj45-pin-numbers.jpg?direct&300|}}
 {{http://hc625ma.org/wp-content/uploads/2019/08/15657324150098716766487940386955-1024x1024.jpg?300 }} {{http://hc625ma.org/wp-content/uploads/2019/08/15657324150098716766487940386955-1024x1024.jpg?300 }}
 {{http://hc625ma.org/wp-content/uploads/2019/08/15657337509018143480297979241976-1024x1024.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/08/15657337509018143480297979241976-1024x1024.jpg?300}}
 +
  
 ---- ----
Line 99: Line 104:
 Congratulations, your master controller is finished! :) Congratulations, your master controller is finished! :)
  
-You will now need to make a small accessory to flash it.+You will now need to make a small accessory to flash peripherals.
  
 ---- ----
Line 110: Line 115:
 {{http://hc625ma.org/wp-content/uploads/2019/07/RJ-45-Pinout-T-568B-pin-diagram.jpg?300}} {{http://hc625ma.org/wp-content/uploads/2019/07/RJ-45-Pinout-T-568B-pin-diagram.jpg?300}}
  
-WHITE-ORANGE -> FTDI232 VCC +  WHITE-ORANGE -> FTDI232 VCC 
-ORANGE -> FTDI232 GND +  ORANGE -> FTDI232 GND 
-WHITE-GREEN -> NC +  WHITE-GREEN -> NC 
-BLUE -> NC +  BLUE -> NC 
-WHITE-BLUE -> FTDI232 TX +  WHITE-BLUE -> FTDI232 TX 
-GREEN -> FTDI232 RX +  GREEN -> FTDI232 RX 
-WHITE-BROWN -> FTDI232 DTR +  WHITE-BROWN -> FTDI232 DTR 
-BROWN -> NC+  BROWN -> NC
  
 {{http://hc625ma.org/wp-content/uploads/2019/08/IMG_20190814_155357-1024x1024.jpg?300 }} {{http://hc625ma.org/wp-content/uploads/2019/08/IMG_20190814_155357-1024x1024.jpg?300 }}
simchair4/guide_master_controller.1569361778.txt.gz · Last modified: 2019/09/24 23:49 by retrogamer

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki