Gimbal magnet holder mod for 5x5mm magnets

There seems to be a problem with finding 6x6mm magnets, so here’s the mod for 5x5mm ones!  The problem is, I can’t buy them locally, and they will probably take some time to arrive, so there’s no way I can test the holder. I think it should work fine, as all gimbals now have mechanical calibration. The resulting travel angle of the lever may differ a bit, but that difference shouldn’t be too noticeable. There are two versions: one with 5x5mm socket in an original place, and the other with a slight offset (closer to the sensor) from center. Choose whatever suits best for you!

Download it here.

Cheers!